« Installations | Main | Random Events »
Saturday, March 06, 2010
Vinnys F3 Camaro, new paint for a new season
some new paint, and some tweaks for this 7.70 sec street car.
frank, viny and the team at psi motorsports are looking for 7.50s on this tremec true street car this year...
Monday, February 22, 2010
Turbo Mustang Dyno 2-21-10 PSI Motorsports 347ci 78mm Th400
Turbo Mustang Dyno 2-21-10 PSI Motorsports 347ci 78mm Th400
Monday, January 25, 2010
Thursday, December 03, 2009
Jace's Turbo Mustang Dyno Day
My friend jace stopped at franks today to have him tune his turbo mustang, 101mm, 408w, 2spd glide, 8.8 rear.
he had a goal of 800rwhp on pumpgas and they found it.
APS TT Z06
I stopped up at franks today to check out an 2008 Z06 that they installed a APS twin turbo kit on, the fit and finish of this kit, and quality of the parts are amazing, looks like everything belongs there from the factory, really amazing.
Video with Music
Edited on: Thursday, December 03, 2009 1:03 AM
Categories: Installations, PSI Motorsports
Monday, November 16, 2009
Sunday, November 15, 2009
Wednesday, November 04, 2009
A little closer to the goal...
little bit more time on the dyno last night with ryans car, sounding and running great at 8, 10, and 12psi...
went to jump right to 16psi and we had the boost cut set there, and it was set for fuel cut, took out the plugs in the car, so we called it a night.
going to go back up when new plugs are in but other than that the car is getting closer to the goal...
*videos recorded by Cody
8psi
Edited on: Wednesday, November 04, 2009 6:55 PM
Categories: PSI Motorsports, Turbo Rusty, Video
Friday, October 16, 2009
Clean yellow turbo car on dyno
short video of this very clean car on the dyno, 715rwhp @ 16psi with 21% converter slip haha
Thursday, October 15, 2009
twin turbo ls2 GTM
intresting to say the least, i cant wait to see what kind of power this car puts down
Wednesday, October 07, 2009
johns big block twin turbo car at numedia dragway
john taking his big block twin turbo yenko clone down the track to a
7.92 @ 182mph
Edited on: Wednesday, October 07, 2009 9:56 PM
Categories: Drag Racing, PSI Motorsports, Video
Thursday, August 20, 2009
Sevens IHE C5 Dyno Tune At PSI Motorsports
Sevens C5 Vette Intake header exhaust dyno tune at psi motorsports
340rwhp
Monday, August 03, 2009
C5 coupe dyno tuning session and Vararam intake install
I installed a Vararam cold-air intake and air bridge in Frank's dyno bay at PSI. Frank then tuned the car on the dyno. 340whp and 335wtq on an 80 degree day with a ton of humidity, overall I'm happy with the car. Feels strong, pulls hard as hell in every gear and definitely has way better throttle response than stock. Way better throttle response than any drive-by-wire car I've ever been in for that matter.
A full mod list can be found in the Corvette member rides page. Video of a burnout, exhaust tone video clip and dyno video clip to come.
Here are the pics...
Wednesday, July 22, 2009
Some pics from the atco rental
here are some pics i took at the atco rental.
Edited on: Tuesday, August 11, 2009 2:38 AM
Categories: Drag Racing, PSI Motorsports
Brad Harris Atco Test and Tune 7-22-09
7psi off the wastegates, first pass of the day. 7.78 @ 180mph 1.23 60ft. 540ci BBC twin promod 90mm's rossler 400 ford 9in...
I hope you understand the car is capable of some record setting passes, and that 7psi is just the tip of the iceberg so to speak.
Edited on: Tuesday, August 11, 2009 2:38 AM
Categories: Drag Racing, PSI Motorsports
Monday, July 13, 2009
some pics from maple grove test and tune
here are some of the highlight pics from maple grove, test and tune with vinny and kens car. maple grove raceway 7/13/2009
Edited on: Tuesday, August 11, 2009 2:39 AM
Categories: Drag Racing, PSI Motorsports