« Moroso Drag springs | Main | Drag shocks »
Friday, September 14, 2007
Dynojet Goodies
Sunday i ordered a dynojet multi function hub, this particular item does quite a few things, it plugs into the power commander, and allows you to add features like... a 0-5v sensor for anything, most commonly used for a map sensor to add fuel in boost, IE turbo charged and supercharged applications! It also has vehicle speed and gear input corrections, just like the power commander if you change your exhaust and filter you need to tune the fuel, well if you change your sprockets, you can compensate your vehicle speed with it, it also has 2 outputs that you can switch with rpm and tps, as in nitrous (wich i just setup) or an air shifter etc. It also has a map selector switch, so now i can load the nitrous map and the NA map without using the laptop every time. So i removed the lap timer nitrous setup i had, and installed the multi hub, had to do some cutting to the rear storage compartment because its really cramped, ran my map selector switch and my outputs to the multi hub, then wired the solenoid strait to the battery, since the multi hub grounds items up to 3 amps per channel (2 channels). I also instalelled a switch inline with the noid so when im off the nitrous map it isnt dry firing the noid if i rip into the bike. I used the dynojet map selector switch holder, i used paper clips to hold it in place in the pics to see if i would like it there, i super glued it together there and it works great.
Cant wait to try out my new toys at the track this weekend. Here are the pics.
