« Diesel Exhaust Complete | Main | 5th wheel hitch removal »
Thursday, June 28, 2007
Motor teardown
Well today, while ryan completed the exhaust on the diesel truck, i cleaned up the heads and taped off the ports, Then when the truck was all done with both of us working on it, after welding in the rain and pulling the truck into the garage to finish it. We decided to take the pan off the motor and yank the broken piston and check out the bearing. Well here are the pics, and i didnt snap one of the bearing, but that is shot. So now we are gunna look at the rest and see if thats the story with them all.
