Line Lock Install

Well, Ryan and I got cracking on the line lock install at around 8 oclock, We had already mounted the switch so all we needed to do was destroy the stock lines and throw in some braided ones leading to the line lock haha. So he got to cutting the ones that were in there. After the right lines were cut, we flared the ends and fitted them to the T fitting, both outlets Got T'd together and into the linelock, then out of the linelock back into a T and into the stock brake lines, it sounds like a mess but didnt really go bad at all, everything went according to plan, It was kindof a pain to reach everything since you are between the motor, headers, and fender reaching in on everything, but we managed to get the flare tool in and do the buisness and everything worked out fine. I also too pictures of the new AN fittings and stainless lines on the oil relocation kit, The relocation kit was also moved to the frame rail. Tomorrow we will bleed the brakes and test it out! Check out the pics!