« Plans to port stock blower | Main | Ported Blower installed, dyno tomorrow »
Saturday, January 20, 2007
Porting done!
Today Corey laid out the outline and got right to work porting. We used a metal hole saw kit to get the 3 upper cuts worked perfectly, better you would have expected it to, and a dremel to get the finer points cut in, tomorrow we are going to sand out the inside of the case and make sure there are no burr's and then take the torpedo over to the garage and heat er up and bolt this thing back on and paint the rest of the cage since it will be warm enough to dry nicely. But here are some crappy camera phone pics of our work, I will take some pictures of it with the good camera tomorrow. Along with the Installation pics.
