well, AJ got his nitrous kit

Well AJ recieved his wet nitrous kit, so today me and him and corey decided was a good day to do the install. The most difficult part of the install was trying to figure out how, and where we would tap the fuel line for the wet nitrous kit. Since this could either be really easy, or really difficult. We lucked out and corey was first to check it out, finding a rubber fuel line. This would be amazingly easy, considering you can cut it and install a T bracket. Wich luckly enough was supplied with the kit, how could it get any easier. Also, AJ has previously mounted the bottle easily because there is nothing in the back of his van, so with that out of the way corey drilled a hole thru the bottom of the body and we ran the line into the engine bay, we then drilled lines and zip tied the solenoids in place, also punched a small hole on the intake gromet then installed the pirahna nozzle and zip tied it to make sure it doesnt come out.

We then tested the fuel and nitrous lines, and we have a problem with the fittings coming off the noids, they dont look to be the right size, since the lines we tested in and out of the kit dont seem to fit correctly. So me and Mr AJ will be going out and buying new fittings tomorrow and completing the wiring. Here are some pics for you to enjoy.

Comments? Questions?