July 2010

Donavans P1SC dyno

dyno pull video

dyno'd 2 cars today... Aarons Chevelle and Donavans TA

well most of you might not know, donavan bought a blower head unit off cragslist for, then got a bracket, belt, etc and made it all work for something of the tune of 1600 dollars

motor vs blower...

i let out early because the car is out of injector/pump and doing a nice 13.5 AFR 116% duty cycle, non intercooled p1sc 42lb injectors and stock fuel pump still

great increase for 3.5psi! hahhahaha

next up is aaron on motor, and then nitrous.

good improvement on both!

Turbo Rusty Pump Gas Tune Night At PSI Motorsports

after a small timing error on our part, the car was on its way to making big power right away.

554rwhp 615ftlbs on 12psi and pump gas through the th400

forks installed!

ordered a set of drag forks for the front end, man does it look great on its own 2 feet again.

chain and sprocket soon

skalor tuned a 2010 gmc sierra

4.8 with the 4 spd 4wd

this fucker does 100mph in 2nd gear, the gears are so long and it has like 31 inch tires on it lol...

tuned on 87 octane to tow

picked up some goodies for the busa

extenstions, oil cooler block offs, lowering links, all installed.

Bruces TVS2300 GTO

skalor hot tuned bruces 04 GTO

im not sure of the cam specs, but a stock ls1, stock heads, aftermarket cam, maggie 2300 10psi of boost. i think josh got in 11-12deg of timing.

here is a comparison of stock with longtubes. vs now with the maggie and the cam.

ignition switch

since my bike's ignition was destroyed and the keys are missing, i wired up a nice on off switch today.

whack shack nova motor install today

helped ryan install his motor today, gunna get some highspeed install video of it later!

another explorer motor lives on!

yet another junkyard 5.0 rescued to live again.

new frame picked up and installed

working out the bugs on the dyno today

working on getting the bugs out of the car before the real dyno appointment with frank, and what you would expect, the shift cable became damaged because we screwed it up during the install... so it will be fixed, replaced, and we will try again later haha. i just put up some video for fun.

drag busa updates

all torn down, check out that frame damage!

picked up my bike today from the scrapyard

the drag busa project begins

sloppy mechanics 2010 fireworks show

here is the last 13 min of our annual fireworks show of 2010

drag bike home

time to start the teardown